Faraday Type 11 (K1) Products
Showing 1 to 20 of 32 products
Frequently Asked Questions
What does the K1 or Type 11 classification indicate about this Faraday radiator?
The K1 or Type 11 classification denotes that this radiator is constructed with a single flat front panel and one row of internal convector fins welded to the rear which provides an efficient heating solution with the slimmest possible wall profile in the Faraday range.
How does the wall projection of the Type 11 Faraday compare to the Type 21 model?
The Type 11 Faraday is significantly slimmer than the Type 21 having a radiator depth of roughly 50mm to 55mm which results in a total wall projection of approximately 80mm to 90mm when mounted making it ideal for narrow corridors or behind doors where space is critical.
Is the heat output of the Faraday Type 11 sufficient for a large living room?
Generally the Type 11 model has a lower heat output than double panel Type 21 or 22 radiators because it has less surface area so for a large living room you would likely need a very wide Type 11 radiator or multiple units to match the BTU requirement.
Why is the Faraday Type 11 often chosen for hallways and landings?
The Faraday Type 11 is frequently selected for high traffic areas like hallways and landings because its ultra slim profile ensures it does not intrude into the walkway while the flat front panel is easy to wipe clean of scuffs and dust.
Do I need specific brackets for the Faraday Type 11 flat panel radiator?
The radiator is supplied with dedicated L shaped wall brackets that are specifically designed to hold the single panel securely and typically offer two depth positions allowing you to adjust the wall projection slightly to clear skirting boards or pipes.
How do I access the convector fins for cleaning?
To clean the internal convector fins you can remove the top grille and side panels which generally clip on or are held by screws allowing you to use a vacuum cleaner or radiator brush to remove dust buildup that can insulate the fins and reduce heat efficiency.
Can I install the Faraday Type 11 on a stud wall without reinforcement?
Because the Type 11 is the lightest model in the Faraday range holding less water and steel than double panel versions it is often safe to mount on standard stud walls using appropriate heavy duty hollow wall anchors though fixing into the timber stud is always the preferred method.
What is the standard connection size for the valves on this radiator?
The Faraday Type 11 features standard 1 2 inch BSP female connections at each corner of the radiator which ensures compatibility with widely available manual and thermostatic radiator valves found in the UK market.
Does the flat front panel reduce the radiant heat compared to a grooved panel?
No the flat front panel is simply a decorative fascia that covers the water channels and the steel still radiates heat effectively into the room while the rear convector fins generate the convective warm air flow so performance is comparable to standard grooved Type 11 radiators.
Why is the chemical inhibitor essential for this mild steel radiator?
Mild steel radiators will corrode internally if exposed to oxygenated water so you must add a high quality chemical inhibitor to your central heating system to form a protective layer inside the radiator preventing pinhole leaks and ensuring the 10 year guarantee remains valid.