Acessories & Feet for our Classic Column Products
Showing 1 to 12 of 12 products
Frequently Asked Questions
How do I determine if I need a Stud Wall Bracket Kit for my installation?
You need a Stud Wall Bracket Kit if you are installing heavy column radiators onto a partition or stud wall rather than solid masonry. Standard brackets may not align with the timber studs inside your wall. This kit specifically allows you to bridge the gap between studs, providing a secure anchor point for the heavy weight of water filled radiators. The kit ensures safety and prevents the radiator from pulling away from the plasterboard.
What is the main technical benefit of using a Floor Mount Kit for classic column radiators?
The Floor Mount Kit is a structural problem solving solution that transfers the substantial vertical load of the radiator directly to the floor rather than the wall. This is critical when your walls are made of weak materials like drywall or old lath and plaster that cannot support the shear weight of cheap budget direct own brand classic column radiators. It allows for a safe installation where wall mounting alone would be risky.
How do I select the correct Slip On Foot size for my Budget Direct radiator?
You must select the Slip On Foot that matches the specific column depth of your radiator model. These mounting options come in 2 Column, 3 Column, and 4 Column variations. To solve this, simply count the number of vertical columns in a single section of your radiator looking from the side. Choosing the wrong size will result in an unstable fit and potential rattling.
Can I install Budget Direct Classic Column Radiators on plasterboard walls safely?
Yes you can install them on plasterboard but you must use specific mounting options to handle the weight. It is highly recommended to use a Floor Mount Kit or Slip On Feet to take the weight of the unit, using the wall brackets only to prevent the radiator from tipping forward. Relying solely on standard wall fixings into plasterboard is unsafe for heavy column radiators.
What is the difference between the Floor Mount Kit and Slip On Feet mounting options?
The Floor Mount Kit is a heavy duty rigid support that is bolted to the floor and the radiator sits on top or is clamped to it, offering maximum stability for high traffic areas. Slip On Feet are more decorative supports that slide onto the bottom of the radiator sections. While Slip On Feet support weight, the Floor Mount Kit offers a more permanent fixed position which is better for uneven floor surfaces.
How many floor mounts are required for large classic column radiators?
The number of mounts depends on the length and number of sections in your radiator. For radiators with up to 21 sections, a Two Mount Kit is sufficient to support the span. For larger cheap budget direct own brand classic column radiators containing 22 to 40 sections, you must use a Four Mount Kit to prevent the radiator from sagging in the middle and to distribute the heavy load evenly across the floor.
Why is a Nylon Spanner recommended for installing mounting options and valves?
A Nylon Spanner is a crucial tool for protecting the finish of your radiator accessories during installation. Metal spanners can easily chip or scratch the paint on powder coated surfaces or chrome fittings when high torque is applied. Using a nylon tool ensures you can tighten the fittings securely without damaging the aesthetic coating of your new Budget Direct Classic Column Radiators.
Can I add a towel rail to my existing column radiator setup?
Yes you can retrofit a towel bar if your radiator has enough sections. The specific towel bars available require a minimum width to clamp securely. You need a model with at least 8 sections for the smaller bar or 10 sections for the larger bar. This adds functionality to your heating emitter without requiring any plumbing changes or complex mounting options.
Do the mounting accessories match the finish of cheap budget direct own brand radiators?
Yes the accessories are manufactured to match the radiator finishes perfectly. Whether you choose the standard White RAL 9016 or a custom S4H RAL Colour or Special Finish, the brackets and feet are painted or powder coated in the same batch or to the same code. This ensures a seamless visual look where the mounting options blend invisibly with the radiator body.
Are the Cast Feet purely decorative or do they support the radiator weight?
Cast Feet are functional load bearing components, not just decoration. They are made from solid heavy duty material designed to support the full operating weight of the radiator when filled with water. They solve the problem of wall stress by acting as the primary support, allowing the wall stays to act merely as a safety restraint against tipping.