Florina - Anthracite Products
Showing 1 to 3 of 3 products
Frequently Asked Questions
How does the anthracite finish on the Reina Florina affect heat output compared to chrome models?
The Reina Florina features a textured anthracite powder coated finish which offers superior thermal performance compared to chrome plating. Technically chrome has a low emissivity value meaning it traps some heat inside the metal whereas the powder coated anthracite surface is more emissive allowing heat to radiate more efficiently into the room. Consequently an anthracite Florina model will typically generate around 20 to 30 percent more BTU output than a chrome towel rail of identical physical dimensions making it a better choice for heating larger bathrooms.
What are the specific pipe center measurements required for installing the Florina rail?
To install the Reina Florina Anthracite rail you must calculate the pipe centers based on the 500mm width of the unit. For standard installation where the valves connect to the bottom uprights the pipe centers are typically 450mm. This is calculated by taking the total width of 500mm and subtracting approximately 50mm to account for the internal valve positions. However it is technically advisable to have the physical radiator and valves on site before fixing the final pipework to ensure 100 percent accuracy and avoid plumbing adjustments.
Can the Reina Florina Anthracite be converted to dual fuel for summer heating?
Yes the Reina Florina collection is fully compatible with dual fuel installation. To achieve this you must install a T-piece adapter along with a standard radiator valve and an electric heating element. This setup allows the rail to be heated by your central boiler during winter and independently by the electric element in summer when the main system is off. You must ensure the electric element wattage matches the thermal capacity of the specific rail size to prevent overheating or internal pressure buildup.
How does the grouped bar design of the Florina improve functionality?
The Reina Florina utilizes a unique design where the horizontal bars are arranged in distinct groups rather than being evenly spaced along the entire height. This technical configuration creates larger open spaces between the sections of bars. These gaps allow you to easily slide thick bath towels onto the rail without bunching them up which improves air circulation around the fabric. Better airflow results in faster drying times and reduces the likelihood of damp smells developing on your towels.
What wall projection clearance is needed for the Florina Anthracite rail?
The Reina Florina has a depth specification of 120mm from the wall to the front face of the rail. You must verify that your bathroom layout can accommodate this projection particularly if installing behind a door or in a narrow walkway. The 120mm depth is necessary to support the high heat output of the steel bars and to provide sufficient clearance behind the rail for air to circulate which is essential for the convection process that warms the room.
What type of valves are compatible with the Reina Florina connection points?
The Florina uses standard 1/2 inch BSP connections located at the bottom of the vertical collector bars. The type of valve you require depends on your pipework. You will need Angled Valves if your pipes emerge from the wall or Straight Valves if your pipes come up from the floor. It is highly recommended to use Anthracite or Black Nickel Thermostatic Radiator Valves (TRVs) to match the finish of the rail and to provide independent temperature control for energy efficiency.
Is the mild steel construction suitable for use in damp bathroom environments?
The Reina Florina is manufactured from high quality mild steel which is chosen for its durability and rapid heat transfer properties. To protect the steel from the humid bathroom environment the rail undergoes a rigorous powder coating process to apply the anthracite finish. This coating creates a robust seal that prevents moisture from reaching the metal substrate significantly reducing the risk of external rust. The product is pressure tested and comes with a 10 Year Guarantee confirming its structural reliability.
How do I properly maintain the textured anthracite finish?
To maintain the pristine condition of the textured anthracite finish you should clean the rail regularly using only a soft dry or slightly damp microfiber cloth. You must strictly avoid using abrasive scouring pads wire wool or acidic chemical cleaners. The textured surface can trap dust more easily than smooth chrome so regular dusting prevents buildup. Using harsh chemicals can degrade the powder coating over time leading to potential corrosion issues which would not be covered under the warranty.
Is the Reina Florina compatible with low temperature heating systems like heat pumps?
The Reina Florina is compatible with low temperature systems such as air source heat pumps but you must adjust your heating expectations. The advertised BTU ratings like 2239 BTUs for the 1525mm model are based on a Delta T of 50C standard for gas boilers. If used with a heat pump operating at Delta T 30C the output will be lower. You may need to select a larger size model to compensate for the lower water temperature and ensure the room reaches the desired warmth.
Does the 500mm width limit the heating capacity for large family bathrooms?
While the Florina has a fixed width of 500mm across the range it compensates for this with vertical height options up to 1525mm. The tall 1525mm model provides a substantial surface area capable of outputting over 2200 BTUs. However for very large family bathrooms this may still be insufficient as a primary heat source. In such cases you should technically treat the Florina as a towel warmer and secondary heater potentially pairing it with underfloor heating or a second radiator to meet the total heat loss requirements of the space.